Experience one of the best pedals on the market with the Nuo Simulation Evo 1 pedals set.
What you will get :
- 1 x accelerator pedal unit
- 1 x brake unit
- 1 x clutch unit (only when buying a 3-pedal set)
- 1 x footrest
- 5 x replacement elastomers for individual adjustment of the brake hardness level
- 1.8m USB connection cable
- Small parts:
– Screws, nuts and washers for attaching the pedal set to the baseplate or other chosen surface.
– Screws: 12 x M6
– Washers: 24 x M6
– Nuts: 12 x M6
Accelerator pedal
Technology :
Hall sensor controlled
- Ball bearing Hall sensor housing with 2RS bearing: 16-bit resolution
- Individually adjustable in hardness and travel
- There are 7 detented suspension points in the lever arm. The detents serve to prevent accidental adjustment.
- Start and end position (steplessly) adjustable (damped in each case)
Weight: approx. 1.8kg
Brake pedal
Technology :
Loadcell-controlled (works via the force and not the path)
- Individually adjustable in hardness and travel
- There are 7 detented suspension points in the lever arm. The detents serve to prevent accidental adjustment.
- Start and end position (steplessly) adjustable (damped in each case)
- 200kg (Loadcell)
Weight: approx. 2,4kg
Clutch pedal
Technology:
Hall sensor controlled
- Ball bearing Hall sensor housing with 2RS bearing: 16-bit resolution
- Coupling with adjustable gripping point
- Visually, very beautiful and robust one-sided shot
- Start and end position (steplessly) adjustable (damped in each case)
- Pedal plates adjustable in height in seconds
Weight: approx. 2,1kg
Electronics
Leo Bodnar
USB controller with 16-bit resolution